DYNAMO ENTERPRISE

The gauss meter is a reliable measuring device for measuring the existing magnetic field. This gauss meter is suitable for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields. With the gauss meter PCE-EMF 40, it is possible to measure magnetic fields up to 2000 mG directly.

The gauss meter is a reliable measuring device for measuring the existing magnetic field. This gauss meter is suitable for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields. With the gauss meter PCE-EMF 40, it is possible to measure magnetic fields up to 2000 mG directly.

These hand-held ultrasonic thickness gauges are intelligent and are controlled by a microprocessor, which can measure thickness and sound speed of various materials quickly, accurately and without damage by ultrasonic measurement. This instrument is capable of accurate measurement for different materials or parts in industrial production, as well as monitoring pipelines and pressure vessels of production equipment, and corrosion degree of various parts in use. It can also be widely used in manufacturing, metal processing, commodity inspection and other testing areas. Any material that allows ultrasonic to transmit at a constant speed and that is distinguishable from waves reflected from the back side is applicable to this instrument..

Contact probes are single element longitudinal wave probes intended for use in direct contact with a test piece and they consist of receptacles, cases, protective membrane, piezoelectric elements, sound-absorbing materials and other components.

The connectors of the probe cables are Q6 connectors for small element probes (Diameter=12mm) and Q9 connectors for other element
The contact probes are widely used for the inspection of forgings, castings, rods, plates, shafts and etc.

• The piezoelectric elements are used for transmitting and receiving the ultrasonic waves.
• The protective membrane is made of high hardness corundum film featuring high resistance to abrasion and corrosion.
• The cases are made of aluminum alloy with the surface sanding and passivation.
• The absorbing materials are used to absorb the back noise of the elements.
• The receptacles are the electric signal interfaces for connecting an instrument with a probe cable

Other Details:

EMAT Thickness Gauge NOVOTEST UT-3M-EMA is a new development of the NOVOTEST company, which will allow our users to solve not only the standard tasks of testing the thickness of metal products, but also to carry out tests in cases where traditional methods, such as piezo-ultrasonic, laser-optical, X-ray, mechanical, etc. – not applicable.

Electromagnetic-acoustic (EMA) technology for measuring thickness is based on the excitation of ultrasonic vawes in the material by the generator of the device’s probe, and fixing the path time of ultrasonic waves in the material.

Advantage

• A significant advantage in comparison with analogues is the unique automatic operation mode of the thickness gauge. The device automatically analyzes the measured signals, selects the required measurement method, adjusts the parameters of the receiving path and displays the measured thickness in large numbers on the display. Even an unprepared user in the automatic mode will be able to accurately and quickly measure the thickness of various metal structures and products.
• It is also necessary to pay attention to the fact that the device implements the B-scan mode, which allows user to get the product profile like a picture that is easy to read. Using a specialized carriage for the probe, it becomes possible to scan extended objects and obtain a thickness profile.
• In cases when it is necessary to sort the products with clearly defined thicknesses (min., max.), above which a decision is taken on the products is defective, a special control mode of the thickness gauge is used. The operator sets the minimum and maximum gates and watch a graphical representation on the display of the measured thickness, receives an alarm when the measured thickness goes beyond the gate and also can estimate corrosion damage as a percentage of the nominal thickness of the product.
• For expert testing, it is possible to carry out manual measurements using all known methods – using the autocorrelation function (ACF), measurement between two maximum signals in the gate, echo by zero crossing, echo echo passing through zero.
• To calibrate the device, there is a special auto calibration mode on a standard thickness sample.

Ultrasonic thickness gauges are designed to improve safety and ensure reliability of materials subject to corrosion or erosion. The gauge is frequently used to monitor steel thickness in various areas of ships and offshore constructions. It is also used for monitoring pipelines.

Ultrasonic thickness gauges are designed to improve safety and ensure reliability of materials subject to corrosion or erosion. The gauge is frequently used to monitor steel thickness in various areas of ships and offshore constructions. It is also used for monitoring pipelines.

A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical measurement in the coatings industry because of its impact on the coating process, quality and cost.

Ultrasonic thickness gauges are designed to improve safety and ensure reliability of materials subject to corrosion or erosion. The gauge is frequently used to monitor steel thickness in various areas of ships and offshore constructions. It is also used for monitoring pipelines.

Other Details:

• Wide range of measuring thicknesses
• Convenience and ease in operation
• Minimum number of controls
• Select the type of probe through single button
• Preset velocity of ultrasound
• Graphical display with backlight
• Compensation of probe delay
• Control of the batteries
• Mapping the presence of acoustic coupling on the graphic display
• Fixation of the last measurement result in the removal of the transducer surface

The Elcometer range of digital coating thickness gauges has been specifically designed to provide highly accurate, reliable and repeatable coating thickness measurements on almost any substrate, whether ferrous or non-ferrous.

Black Plating Thickness Tester is a precision instrument used to measure the thickness of black plating or coatings on various substrates. It is commonly used in industries such as automotive, manufacturing, and electroplating to ensure quality control and compliance with standards.